品牌：RETZ/我们一直致力于流体控制和测控领域的持续创新，始于2005……进口气动针型阀采用两截阀杆设计，上阀杆螺纹的润滑脂与系统介质隔离，旋转的下阀杆上下运动代替旋转升降，减低每个过程对填料的磨擦，减少阀座和阀头之间的咬合，阀门在全开位置具有背密封功能，确保工作状态下不会发生泄漏，在相应的温度下密封件不会发生密封不严retz The pneumatic needle valve adopts a two section valve stem design. The lubricating grease on the upper valve stem thread is isolated from the system medium. The rotating lower valve stem moves up and down instead of rotating up and down, reducing the friction of the packing during each process and the bite between the valve seat and the valve head. The valve has a back sealing function in the fully open position, ensuring that there is no leakage during operation and that the sealing element does not leak tightly at the corresponding temperature
进口气动针型阀特点 Characteristic
通过压缩空气控制阀门的开关 Switch of valve is controlled by compressed air
开关寿命长，尺寸紧凑 Long service life and compact size
PTFE 密封，可用于水、油等与阀门材质相容的液体或气体 PTFE seal can be used for water, oil and other liquids or gases compatible with valve materials
顶部带阀位指示 Valve position indication on the top
进口气动针型阀技术参数
介质温度：-30℃～+600℃
公称压力：≤3000-10000psi
环境温度：-30℃～+80℃
阀体材质：不锈钢 316L
气缸材质：铝合金
连接方式：内螺纹（G、NPT），焊接，卡套 ，
规格尺寸：1/4-1/2”
填料密封：PTFE、PEEK、石墨
开关形式：常闭式 NC(通压缩空气开，弹簧关闭)
常开式 NO(通压缩空气关，弹簧打开)
压缩空气压力：4～8bar