模具整体结构比较简单，并且内、外模的设计更容易让施工的时候更容易进行脱模，整个模具经久耐
用。产品的浇筑生产一般采用的是现浇的方式，在施工的时候需要先在地上挖一个足以盛下模具的大
坑，然后将模具在坑中拼接组装好后浇筑进混凝土浆料。一般模具之间为了保证内、外模的距离一致
，通常会使用螺栓进行固定之后形成一个固定间距的空腔，这样就能够保证使用模具生产出来的混凝
土制块形状大小都是一样的。
The overall structure of the mold is relatively simple, and the design of the inner and
outer mold is easier, which makes it easier to demould during construction, and the whole
mold is durable. The pouring production of products generally adopts the method of cast-
in-situ. During construction, it is necessary to dig a large pit on the ground enough to
hold the mold, and then splice and assemble the mold in the pit before pouring the
concrete slurry. Generally, in order to ensure the consistent distance between the inner
and outer molds, bolts are usually used to form a cavity with fixed spacing after fixing,
so as to ensure that the shape and size of concrete blocks produced by molds are the
same.
安装施工快捷，工期极短工厂一体化生产，一次整体成形，施工现场一次性吊装到位，半天即可完成
安装，大大提高了施工效率，缩短建设周期，提高了经济和社会效益。占地面积小产品结构紧凑，占
地面积小，实际占地面积为传统化粪池的60%左右，节约土地资源。专利设计，抗压强度高该产品外观
为圆筒形设计，筒体两端采用力学凹凸面设计制作。The installation and construction is fast,
the construction period is extremely short, the factory integrates production, takes
shape at one time, the construction site is hoisted in place at one time, and the
installation can be completed in half a day, which greatly improves the construction
efficiency, shortens the construction cycle, and improves the economic and social
benefits. Small floor area, compact product structure and small floor area. The actual
floor area is about 60% of the traditional septic tank, saving land resources. Patented
design with high compressive strength. The appearance of the product is cylindrical
design, and both ends of the cylinder are made of mechanical concave and convex surface
design.
模具加工机器操作：一个合格的钳工应该掌握常用的机器操作，主要有铣、磨、车、钻等。再就是飞
模、装配技巧。师傅不一定讲到或者不是正确的说法。比如：模具的技巧和角度、丝攻的用法、螺
牙孔的预留等等，其实书上都有详细的介绍。多研究下书本上的知识，不懂的问师傅，一般一两个月
，大部分机器操作就没有问题了。
Mold processing machine operation: a qualified fitter should master the common machine
operations, mainly milling, grinding, turning, drilling, etc. Then there are flying die
and assembly skills. Master doesn't necessarily say or is not the most correct statement.
For example, the skills and angles of molds, the usage of tapping, the reservation of
screw holes and so on are introduced in detail in the book. Study the knowledge in books
and ask the master if you don't understand it. Generally, in a month or two, most machine
operations will be OK.